About Us
About Us
About Us

for Break-through
Innovations &
Customized Solutions

Emergency Escape Lighting / Emergency Lighting Module For Led Lights / Down Lights
Emergency Escape Lighting / Emergency Lighting Module For Led Lights / Down Lights

This device is used to illuminate the LED downlights/ lighting fixtures in an emergency event of Power Failure as independent power source for XX minutes of backup time. It can be configured to be used in two configuration modes, i.e. the Maintained Light configuration or Non Maintained Light configuration, however this configuration needs to be set internally during manufacturing process. The Emergency Escape lighting module is designed provide an uninterrupted backup power to the LED Light in event of Power Failure or Tripping of the MCB. Whenever Power is available, the module charges the internal Lithium-Ion battery pack and remains on stand by mode.


As soon as power failure is detected / MCB is tripped, it powers the LED lights for a period of XX minutes, depending on the capacity of the battery pack and the wattage of the LED Lights. If the power is restored / MCB is turned ON before the backup time, then the module stops powering the LED lights and goes back to standby mode. This product is designed, developed & manufactured by Om Energy Savers in INDIA and comes with a 1 year warranty.

Model : OESEELS10-30WXH
Min Order Qty : 25 Nos.

Technical Specifications

  • Available for 10 Watt To 30 Watt
  • Backup Time 30 Mins To 2 Hrs (Depending On Version & Backup Time Required / Selected)
  • Instant Turn On Time < 1 Sec. Deactivation Time : 1 To 2 Seconds After Stable Mains
  • Lithium Ion / Polymer Battery - Capacity & Voltage Depends on Configuration
  • Status Led Indicators for Standby / Power / Chg Status / Battery Low
  • test Switch For Periodic Testing
  • Available For Maintained / Non Maintained led Light
  • Inbuilt Automatic Charger
  • Battery Protection Like Over Charge, Deep Charge, Deep Discharge, Short Circuit
  • Battery Life : 300 To 400 Charge Discharge Cycles
  • Thermal Protection For Battery
  • Aux Mains Detection Port for Actual Mains Failure Detection
  • Input Voltage : 220VAC, 50 Hz
  • Operating Temperature Range : -10° C To 45° C
  • Operating Humidity Range 0% RH To 99% RH.
  • Approximate Weight : 650 To 850 Gms depending On Model & Configuration

Key features

  • Available For Lights from 10 Watt - 30 Watt
  • Backup Time Available Between 30 Mins - 2 Hrs
  • Instant Turn On After Power Failure
  • Available For Mainteained & Non Maintained Lights
  • Powerful BIS Certified Lithium Battery
  • Test Switch Facility
  • Led Indications For System Status
  • Easy To Install
  • No Maintenance Required
  • Easy To Install
  • 1 Year Warranty
  • Made In India

Note : For more detailed technical specifications for tenders pls email us.